Changing Display Adjustment Settings

The Display Adjustment Settings: allow you to configure the default values that will be applied to all video displayed in the View tab.

NOTE: This setting does not affect recorded video.

1. In the Display Adjustment Settings: area, move the sliders to adjust the Gamma:, Black Level:, and White Level: settings.

   By default, the Gamma: setting is set to 0.55, the Black Level: setting is set to 0.5%, the White Level: setting is set to 98%, and Auto-Contrast is disabled.

2. Select the Enable Auto-Contrast check box to allow the system to automatically adjust the contrast level for the video stream.

   NOTE: When Auto-Contrast is disabled, the Black Level: and White Level: settings cannot be adjusted.

3. Click Restore to Factory Default to revert to the factory default Display Adjustment Settings: settings.
4. Click OK to save your changes.

If video is being displayed in a View tab, the new settings will not take effect until the Restore Defaults option is selected in the image panel. For more information, see

 

 

Avigilon Control Center 6.6 | 20170922